700 million swabs a year from a 500 m² ISO Class 8 cleanroom in Suzhou. Thirteen models, six tip geometries, every tolerance published. We wind the heads and seal in the cleanroom; the paper shaft itself comes from a dedicated shaft mill — the one link we do not make, and we would rather say so than have you find out.
Each swab below is drawn to true scale from the published dimensions — not a marketing illustration, and not a photograph where perspective hides the differences. The 3-inch shaft is the format most cleanroom fixtures are already tooled for. What changes is the tip.
Head diameter, head length, shaft diameter, shaft length, overall length — with tolerance, for all thirteen models. Most suppliers write 'precise dimensions'. A number can be checked against the drawing you already buy to.
A 73 mm shaft at φ1.57 mm or φ2.46 mm — the 3-inch format most cleanroom lines are already set up for. Swap the box, not the line.
700 million pieces a year spreads the fixed cost thin. The lower unit price is arithmetic, not a corner cut — and it is the one claim here you can verify by asking for a capacity visit.
The remainder is warehouse, office and non-cleanroom packing, and we will say which line runs where. Suppliers usually quote a cleanroom area and stay silent about the rest — a ratio is harder to check than an absolute figure, which is exactly why we give it.
Business registration, the map pin and this website all carry the same legal name and the same address. Check the registration number in the footer against the national credit system — it will match.
Head winding, sealing, a carton carrying the work-order number. A trading company can photograph a building facade; it cannot photograph its own production steps, because it does not perform them.
Visits are welcome. If you cannot travel, we will run a live walk-through of the line on a call, unedited. Ask for it in your first email.
| Model | Series | Shaft | Tip | Head Ø | Head len | O/L | Shaft Ø | Shaft len | Pcs/pack | Packs/box | Boxes/ctn |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CS15-001 | CS15 fine | Paper | Spherical | φ3.2±0.5 | 12±1.0 | 76±1.0 | φ1.57±0.1 | 73±0.5 | 25 | 100 | 20 |
| CS15-002 | CS15 fine | Paper | Spherical | φ2.6±0.5 | 12±1.0 | 75±1.0 | φ1.57±0.1 | 73±0.5 | 25 | 100 | 20 |
| CS15-003 | CS15 fine | Paper | Tapered | φ3.0±0.5 | 10±1.0 | 78±1.0 | φ1.57±0.1 | 73±0.5 | 25 | 100 | 20 |
| CS15-005 | CS15 fine | Paper | Turned-down | φ2.1±0.1 | 7±1.0 | 78±1.0 | φ1.57±0.1 | 73±0.5 | 25 | 100 | 20 |
| CS15-006 | CS15 fine | Paper | Flat-trimmed | φ2.0±0.2 | 8±1.0 | 75.5±1.0 | φ1.57±0.1 | 73±0.5 | 25 | 100 | 20 |
| CS15-009 | CS15 fine | Paper | Ultra-fine | φ1.1±0.2 | 5±1.0 | 74±1.0 | φ1.57±0.1 | 73±0.5 | 25 | 130 | 20 |
CS15 series shown. All thirteen models, including the 6-inch long-shaft range, are on the full specification page.
We will confirm fit model by model, or tell you where we differ — before you spend money on samples. If it lines up, we send a benchmark kit: three models, three packs each, and a comparison card with a blank column for your own limits.